Installing Large-Format Porcelain Stoneware: Practical Advice Before Ordering the Work in Kyiv

Large-format porcelain stoneware is one of the strongest and most aesthetic materials in modern construction. It is used in apartments, houses, offices, shopping centres and on facades. But installing porcelain stoneware has critically important nuances that directly affect the durability of the surface.

M-STONE (Kyiv) shares practical recommendations that every client should know before the work begins.

What you need to know about large-format porcelain stoneware

Main characteristics:

• minimal water absorption;
• high density;
• resistance to loads;
• difficulty of cutting.

This makes the material ideal, but at the same time demanding to install.

Key stages of correct installation

Substrate preparation

Without a perfectly flat substrate even the most expensive porcelain stoneware will lose its look. Tolerances must not exceed 2 mm per 2 m.

Choosing the adhesive

Only flexible adhesives for large format that ensure full adhesion are used.

Controlling voids

Any air pocket under a slab is a potential crack in the future.

Typical mistakes when installing porcelain stoneware

• saving on adhesive;
• no double application;
• laying without levelling systems;
• violating the temperature regime.

It is these mistakes that most often lead to repairs after just 1-2 years.

When to turn to professionals

If you have:

• tile larger than 120×60;
• a facade or stairs;
• minimal joints;
• an expensive material.

In these cases installing it yourself or hiring “cheap craftsmen” is a direct risk.

M-STONE: professional installation of porcelain stoneware in Kyiv

We do:

• laying on floors and walls;
• stairs and terraces;
• porcelain stoneware facades;
• complex design solutions.

📞 Consultation: +38 068 100 27 96 +38 050 914 18 99

📧 [email protected]