Porcelain stoneware installation
We install large-format porcelain stoneware for floors, walls and facades: we prepare the substrate, cut slabs with the required angles and holes and lay them according to the layout. Prices for cutting, holes and substrate preparation are below, while the cost of the installation itself depends on the format.
What porcelain installation includes
Porcelain stoneware is dense and strong, but a large format needs careful handling and the right tools. We perform the full cycle of work, and you can see the price of every item below.
- substrate preparation: grinding, self-levelling, waterproofing, screed;
- straight, shaped and 45° cutting with grinding;
- holes for pipes and sockets, rectangular cutouts, inspection hatches;
- filling the joints with cement, epoxy or silicone grout;
- protection of the installed tile during further works.
Cutting and processing
Large-format slabs are cut with special equipment so that the edges stay straight and the slab does not crack. We grind 45° corners, so the joints look monolithic.
Approximate prices
| Work | Price |
|---|---|
| Straight cutting | from 200 UAH/lin. m |
| Finishing cut with grinding | from 300 UAH/lin. m |
| Radius and shaped cutting | from 450 UAH/lin. m |
| 45° mitre cuts | from 375 UAH/lin. m |
| L-shaped cutouts | from 560 UAH/pcs |
| Holes up to 70 mm | from 250 UAH/pcs |
| Holes over 70 mm | from 320 UAH/pcs |
| Non-standard holes | from 900 UAH/pcs |
| Magnetic access hatches | from 4,450 UAH/pcs |
| Concealed sockets/switches | from 4,400 UAH/pcs |
| Cement grout | from 210 UAH/m² |
| Epoxy grout | from 330 UAH/m² |
| Silicone joints | from 210 UAH/lin. m |
| Epoxy corner | from 240 UAH/lin. m |
| Work | Price |
|---|---|
| Substrate preparation and grinding | from 180 UAH/m² |
| Self-leveling compound | from 330 UAH/m² |
| Waterproofing | from 330 UAH/m² |
| Screed | from 330 UAH/m² |
| Fibreboard protection | from 120 UAH/m² |
| Waterproofing tape | from 210 UAH/lin. m |
| Stairs with risers | from 2,400 UAH/lin. m |
Indicative prices in hryvnias. The exact cost is fixed in a quote after a site survey.
You can estimate the cost for your project in the calculator; all calculators are available on the Calculators page.
How we work
- Substrate inspection
We check flatness and moisture and determine the preparation needed. - Layout
We plan the position of slabs and joints to minimise trimming. - Installation
Double adhesive application, levelling system, level control. - Grouting
Filling the joints with the chosen compound, final cleaning.
About M-STONE
This material was prepared by the M-STONE team: 20 years of brand history, installation of large-format tile and natural stone in Kyiv and across Ukraine. The company is led by Oleg Dolynskyi. The recommendations describe the typical order of work; a specialist refines the solution for your project after a consultation.
Contact us
We will price your project
Send the dimensions and slab format: we will calculate the material and installation and suggest the timing.