Tools for Installing Large-Format Tile: What the Pros Use in Kyiv

Installing large-format porcelain stoneware (slabs from 1200×2400 mm to 1600×3200 mm) is the technological peak of finishing work. If ordinary 60×60 cm tile can be laid with a manual tile cutter and a notched trowel, then working with slabs in Kyiv’s elite projects, such as the Taryan Towers, Novopecherskie Lipki or Diamond Hill complexes, requires a fleet of equipment worth tens of thousands of dollars.

M-STONE lays its cards on the table: which tools guarantee that your slab worth several hundred euros will not crack during installation and that the joints will look like a hairline.

• Measuring systems and laser navigation

In 2026 accuracy “by eye” is bad form. We begin work on sites (whether Pechersk, Podil or Obolon) by building a perfect 3D model of the room.

360° laser levels (such as Bosch Professional or Hilti): we build planes with a tolerance of 0.2 mm. This is critical for seamless laying, where the smallest deviation at the start will give a centimetre gap at the end of a three-metre slab.

Carbide hygrometers: before laying on a floor in new buildings in Kyiv we are obliged to measure the residual moisture of the screed. Without this stage the adhesive’s adhesion is not guaranteed.

• Cutting with no right to make a mistake: systems for slabs

XL-format porcelain stoneware has enormous internal stress. A wrong cut and the slab will “shoot” a crack in an unpredictable direction.

Manual guide systems (Sigma Kera-Cut, Rubi Slim Cutter): aluminium rails up to 3.6 metres long that are fixed to the slab with suction cups. A tungsten carbide wheel makes a perfect score, and special breakers (separators) let you split the slab smoothly.

Electric tile cutters with water cooling (Montolit Flash Line 3, Rubi TC-125): when a perfectly clean 45-degree cut (Jolly) is needed or when working with a slab 12-20 mm thick, we use diamond blades with water feed. This completely rules out chips and dust on site.

Dust extraction (Festool): we value cleanliness in premium apartments. All our grinding and cutting systems are connected to class M industrial vacuum cleaners.

• Rigging and moving: vacuum safety

A 1600×3200 mm slab weighs about 80-100 kg. It is fragile in bending.

Portable frames with vacuum suction cups (Raimondi Easy-Move): a rigid frame that does not let the slab vibrate or bend when carried. We use only vacuum pump suction cups with gauges: if the pressure starts to fall, the craftsman sees it long before the slab slips.

Rigging trolleys: for moving slabs along the long corridors of the RiverStone or Skyline complexes we use trolleys with a soft ride so as not to damage floor coverings that are already laid.

• Laying and adhesion: 2026 technologies

Simply putting a slab onto adhesive is not enough. You need to push the air out.

Electric vibrating suction cups (Battipav, Bihui): this is M-STONE’s “secret weapon”. High-frequency vibration makes the adhesive ridges collapse, ensuring 100% filling of the space under the slab. It is the only way to avoid voids, because of which tile cracks when walked on or when objects fall.

A reinforced levelling system: we use wide wedges and clamps designed for the pressure of heavy porcelain stoneware. They hold the slabs in a single plane until the adhesive is completely dry.

• A mobile workshop: organising the space

We do not cut tile on the floor. On every site (Kyiv, Irpin, Bucha, Koncha-Zaspa) we set up professional slab workbenches. These are stable modular structures up to 4 metres long that let craftsmen work at full height, ensuring millimetre accuracy.

Why is this important for the client?

Having such equipment at M-STONE is your insurance. A craftsman with one angle grinder cannot provide 2026-level quality. We invest in tools so that you get an interior that looks like a monolithic piece of rock, without a single flaw.

M-STONE contacts:

We work in all districts of Kyiv: Pecherskyi, Holosiivskyi, Obolonskyi, Podilskyi, Darnytskyi and others.

📞 Call a specialist: +38 (068) 100-27-96

📱 Consultation and estimate calculation (Viber / Telegram): +38 (050) 914-18-99

✉️ Send a project by email: [email protected]

📸 Our work on Instagram: @mstone_kiev

📘 We are on Facebook: mstone.kyiv

📺 Process videos on YouTube: M-Stone_Kyiv

The current cost of work for your project can be calculated in the online calculators or confirmed by the manager: it depends on the material, the slab format and the condition of the substrate. The consultation is free.